Nobex Proman Miter Saw

Nobex Proman Miter Saw Review

The automatic locking device adjusts to give you the correct angle for a variety of different frames plus 90 degree cuts. Preset positions at 20, 25, 40, 50 and 55 degrees for compound miters.

Bosch T4B Gravity-Rise Miter Saw Stand

Bosch T4B Gravity-Rise Miter Saw Stand Review

Bosch T4B Gravity-Rise Miter Saw Stand Feature

• Patented Gravity Rise System - Rapid set up and breakdown
• 18-Inch Material Capacity - Highest capacity among fully portable units
• 8-Inch Pneumatic Wheels - ease of transport over jobsite terrain
• Rapid Release Tool Mounts - fits most competitors' miter saws
• Adjustable Leveling-Feet - Stability on uneven surfaces

The Bosch TB4 gravity-rise miter saw stand features the patented gravity rise system, and rapid set up and breakdown. It has an 18-inch material capacity which is the highest capacity among fully portable units. It has 8-inch pneumatic wheels which facilitate ease of transport over jobsite terrain. It also features rapid release tool mounts, adjustable leveling feet for stability on uneven surfaces and it also fits most competitors' miter saws. The T4B Gravity Rise Miter Saw Stand is constructed of heavy duty powder coated 1 1/2 tubular steel. The T4B features Boschs patented gravity rise system, for quick and easy set up and breakdown. With a simple turn of the release lever and some slight downward pressure, the weight and balance of the saw will raise the stand and saw and lock it into working position. Turn the same release lever again to fold the stand and saw and you are ready to roll it easily to the next location. This unit features 8 inch pneumatic wheels that go over just about any jobsite terrain. The T4B utilizes an aluminum support rail and special Universal Rapid-Release Tool Mounts designed to attach to the base of all Bosch and most competitors miter saws. These mounts allow any user to quickly attach or detach the saw to the stand. And rubber-Feet prevent scratches when placing the tool on a cabinet top or bench. The same support rails expand for 18-Feet total material support, the highest among fully portable units. For users cutting long pieces of molding or flooring, this kind of support is priceless. Adjustable repetitive stops and table supports also allow the stand to adapt to varying applications and saws.

Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Review

Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Feature

• 10-inch 80T ultra fine finish cut-off blade with a laser-cut 5/8-inch arbor
• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
• Heat expansion slots let blade expand due to heat build-up; durable micrograin titanium carbide
• Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
• Laser cut arbor for accurate blade rotation reducing vibration and premature wear

For a blade dedicated to cutting ultra-fine finish work with remarkably clean, chip-free results, look no further than the Freud D1080X Diablo 10-Inch Ultra-Fine-Finish Saw Blade. Ideal for fine cabinetmaking, this is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips.

Model # D1080X Diameter 10" Machine Use Miter/Slide Miter Saw, Table Saw Application Finishing Teeth 80 Hi-ATB Arbor 5/8" Kerf .098" Hook Angle 15°

Makes Clean, Chip-Free Cuts in Delicate Finish Work
Achieving premium results when creating finish crosscuts in ultra-fine materials is all about clean, accurate cuts. The Freud D1080X makes this process easy, fast, and precise. To save you time, most cuts made by this blade require little to no sanding.

Trim carpenters, fine cabinetmakers, and avid do-it-yourselfers will want to keep this blade on hand for those special jobs that call for making ultra-fine finish crosscuts in delicate pieces. Appropriate application materials include oak, pine, melamine, veneer plywood, and delicate molding.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1080X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 80 Hi-ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1080X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws
The Freud D1080X is a great addition to your workshop because it's designed with the versatility to fit a variety of table and miter saws, including sliding miter saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box
Freud D1080X Diablo 10-Inch Ultra-Fine-Finish Saw Blade.
FREUD SAW BLADE *10" *80T *5/8" arbor *Ultra finish cut *Super thin laser cut kerf *"Red" Perma-Shield coated *Laser cut stabilizer vents *Laser cut heat expansion slots

Evolution Power Tools FURY3 8-1/4-Inch Multipurpose Cutting Compound Sliding Miter Saw

Evolution Power Tools FURY3 8-1/4-Inch Multipurpose Cutting Compound Sliding Miter Saw Review

Evolution Power Tools FURY3 8-1/4-Inch Multipurpose Cutting Compound Sliding Miter Saw Feature

• Cuts steel, aluminum, wood & plastics using a single blade.
• 2-3/8" Cutting depth capacity
• Slide action for longer cuts
• Laser guide for accuracy
• In-line handle & trigger switches

Evolution Fury 3 8-1/4" TCT Multi-Purpose Sliding Miter Saw

Rousseau 2850 Shop Style Miter Saw Stand Kit

Rousseau 2850 Shop Style Miter Saw Stand Kit Review

Rousseau 2850 Shop Style Miter Saw Stand Kit Feature

• Large 19-by-31-inch Rousseau Shop Style miter saw stand kit platform fits all saws
• 39-inch working height; stable 3-inch industrial locking caster
• Easy fold-down wings for confined spaces and easy storage
• Powder coated finish for durability
• Backed by lifetime warranty

Miter saw stand has comfortable 39" working height. 19" x 31" platform supports all saws. Easy fold down wings for confined spaces. Powder-coated finish. Includes: Frame, casters, and hardware. Wood and planer not included.

Jet JMS-10SCMS 10-Inch Dual-Bevel Slide Compound Miter Saw

Jet JMS-10SCMS 10-Inch Dual-Bevel Slide Compound Miter Saw Review

Jet JMS-10SCMS 10-Inch Dual-Bevel Slide Compound Miter Saw Feature

• Innovative green Xacta laser provides high visibility for precise cutting
• Up-front controls for safety and ease of use
• Dual-bevel capability allows you to angle and stop at 0, 33.9 and 45-Degrees left or right
• Ergonomic, D-shaped over molded handle for maximum control during cutting operations

Designed and built to provide the power, accuracy, and capabilities woodworkers demand, the Jet JMS-10SCMS 10-Inch Dual-Bevel Slide Compound Miter Saw helps you increase productivity without sacrificing your budget. Complete with a versatile base that can mount to a stand or work bench, multiple rubber grip carrying handles for easy portability, and dual bevel capacities of 0, 33.9, and 45 degrees left and right, this handy tool will be a valuable addition to your shop.

The JET JMS-10SCMS 10-Inch Dual-Bevel Slide Compound Miter Saw offers: The green XACTA Laser system for convenience and precision A powerful 15 Amp, 4800 RPM motor Dual bevel capacities of 0, 33.9, and 45 degrees to the left and right An ergonomic handle for improved control

Dual-bevel capabilities offer job flexibility.

An easy-slide fence makes adjustments quick and precise.

The JMS-10SCMS is a versatile, durable, and portable saw. View larger.

The green laser is easier to see in bright light.

Easy-access controls help you maintain safety.

Powerful Motor Balanced by Poly V-Belt
The JMS-10SCMS operates with a robust 15 Amp, 4800 RPM motor that sends its power through a poly-v belt to generate a consistent speed. This belt also substantially reduces vibration and sound for a super smooth cutting action. And for peace of mind, a push-button arbor lock makes blade changes easier and safer.

10-Inch Blade and Operating Arm Power Through Thick Material
The 10-inch diameter blade and innovative design of the operating arm give the JMS-10SCMS tremendous cutting capacities throughout the dual bevel range. With the blade at zero degrees in both miter and bevel, the saw cuts material up to 3-5/8 inches thick and 12 inches wide. At a 45-degree miter, it handles material measuring 3-5/8 inches thick by eight inches wide. At a 45-degree left bevel, cutting capacity is 1-5/8 inches thick by 12 inches wide, or at a 45-degree right bevel, the capacity is 1-3/8 inches thick by 12 inches wide.

XACTA Laser Provides High Visibility
The JMS-10SCMS comes equipped with the patented green XACTA Laser--a Jet exclusive. This special laser emits a distinct green light that is much easier to see in bright, outdoor conditions than are the more common red colored versions. The laser is also mounted in special housing just behind the blade where it remains out of the operator's direct line of vision, but projects its finely focused alignment light across the wood in clear view.

Precision Machined Aluminum Table for Stability and Flexibility
Able to handle a wide variety of projects, the JMS-10SCMS features a precision-machined aluminum table surface that is 21 inches wide with a maximum front-to-back support area of 13 inches at the blade. Incorporated into the table are mounting bosses for securing the saw to a work surface or onto a specialty stand.

A pullout arm at the rear of the base helps stabilize the machine on a flat surface, and the circular center table surrounding the blade is precisely machined to be flat and flush with the table sections to either side. Additionally, the table extension surrounding the blade path has repositionable inserts that can be adjusted to work much like a zero clearance insert, meaning this saw gives you extraordinary flexibility, even on larger jobs.

Fully Functional, Easy-Slide Fence System
The fence system is specially designed to be fully functional with the blade at all miter and bevel angles. For added convenience, it's mounted to the base so that it can be adjusted to be perfectly square to the blade if need be, and it extends further to support the work piece on both sides. The fence also has a set of graduations engraved on its face that make setting up repetitive or specific-length cuts quick and accurate.

Ergonomic Handle and Up-Front Controls for Safety and Control
The JMS-10SCMS boasts an ergonomic, D-shaped, over-molded handle for a steady, secure, and comfortable grip. This design also gives you maximum control during cutting operations.

In addition, the controls are located right up front, so you don't have to hunt around for them as you work or reach over or behind the blade in an unsafe manner to access them. Instead, everything you need for easy operation is both within reach and directly in your line of sight.

The JMS-10SCMS measures 25.2 x 20.7 x 35.8 inches (WxHxD) and weighs 50.7 pounds. It is backed by a three-year warranty.

About JET: A History of Sharing New, Feature-Rich Products
Opened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.

What's in the Box
Jet JMS-10SCMS 10-Inch Dual-Bevel Slide Compound Miter Saw with 10-inch diameter, 60-tooth carbide tipped blade and base.
Includes B3NCH, 10-in Dual Bevel Sliding Compound Miter Saw - 707110, Innovative Green XACTA Laser

Factory-Reconditioned Ryobi ZRTS1343L 10-in Compound Miter Saw with Laser

Factory-Reconditioned Ryobi ZRTS1343L 10-in Compound Miter Saw with Laser Review

Factory-Reconditioned Ryobi ZRTS1343L 10-in Compound Miter Saw with Laser Feature

• Heavy-duty 14 Amp motor
• Electric brake stops the blade in seconds
• Carbide-tipped blade provides a smooth, clean cut
• Exactline laser alignment system accurately aligns cut line with blade
• Horizontal D-handle for improved control

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 10-in Compound Miter Saw with Laser - ZRTS1343L, Operator's Manual

Skil 3820-02 120-Volt 12-Inch Compound Miter Saw with Laser

Skil 3820-02 120-Volt 12-Inch Compound Miter Saw with Laser Review

Skil 3820-02 120-Volt 12-Inch Compound Miter Saw with Laser Feature

• Laser Cutline Guide for accurate cuts
• 15 Amp, 4500 RPM Motor
• Table extension with left/right extension rails for long, large work pieces
• 9 Positive stops for setting common miter angles
• Dust bag helps keep work area clean

Includes 120V 12-in Compound Mitersaw with Laser - 3820-02, 40-Tooth Carbide Blade, Extension Table, Extension Rails (2), Vertical Clamp, Stop Block, Die-Cast Aluminum Sliding Fence, Dust Collection Bag, Blade Guard, Blade Wrench

DEWALT DW745 10-Inch Compact Job-Site Table Saw with 16-Inch Max Rip Capacity

DEWALT DW745 10-Inch Compact Job-Site Table Saw with 16-Inch Max Rip Capacity Review

DEWALT DW745 10-Inch Compact Job-Site Table Saw with 16-Inch Max Rip Capacity Feature

• 15 Amp motor quickly rips through hardwoods with ease
• Rack and pinion fence rails make fence adjustments fast, smooth and accurate
• Telescoping fence rails retract to create a small, portable package
• 16-inch of rip easily cuts a variety of larger shelving and trim materials
• Metal roll cage base offers greater durability than plastic bases; Blade can be adjusted 0 - 45 degrees for bevel applications

The DEWALT versatile 10-Inch Jobsite Table Saw features the Site-Pro Modular Guarding System for application-specific setups that result in quick, accurate cuts. It pairs a portable design with a powerful 15 amp motor and large16-inch rip capacity. This saw comes with blade guards, a miter gauge, a push stick, and a dependable 10-inch, 24-tooth carbide blade to get your project started right away.

10-Inch Compact Jobsite Table Saw with Site-Pro Modular Guarding System At a Glance: Powerful 15 amp, high-torque motor delivers no-load speed of 3,850 rpm Quick, tool-free adjustments with Site-Pro Modular Guarding System Telescoping fence rails Dust-collection port for fast clean up Three-year limited warranty, one-year free service, and 90-day money-back guarantee

This saw features a dependable 15 amp motor that delivers a no-load speed of 3,850 rpm. View larger.

Weighing just 45 pounds, the table saw comes with a folding stand for easy setup and tear down. View larger.

Consistent, Powerful Performance
Thanks to a 15 amp, high-torque motor, this DEWALT table saw delivers the power you need for tough jobs like cutting hardwood and pressure-treated lumber. The saw's 10-inch blade spins at a no-load speed of 3,850 rpm for quick, clean cuts--no matter what the application.

Convenient Site-Pro Modular Guarding System
The DEWALT versatile Site-Pro Modular Guarding System makes it easy to set up for a variety of applications by allowing tool-free adjustment of application-specific guarding components.

The saw's exclusive fence configuration enables a huge 16-inch rip capacity. Rack and pinion fence rails make fence adjustments fast, smooth, and accurate. The fence's telescoping design allows the rails to move out to 16 inches to rip full sheets of materials or be retracted for a compact design that's easy to transport.

In addition to offering large rip capacity, this saw features a maximum cut depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees. Its table surface is coated to reduce friction for improved cut quality across the board, while a metal roll cage base provides a sturdy setup and improved durability when compared with plastic bases.

Portable Design for Use Anywhere
This DEWALT table saw weighs just 45 pounds which, along with the folding table saw stand makes for easy setup and tear down. You can move it from your workshop to the worksite with ease.

For added convenience, on-board storage provides easy access to the Site-Pro Guarding components and the push stick when they're not in use. A handy 2-1/2-inch dust collection port allows you to connect the saw to a Shop-Vac for efficient dust extraction and a cleaner work area.

This 10-inch jobsite table saw with Site-Pro Modular Guarding System also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box
DW745 DEWALT 10-Inch Job Site Table Saw, 10-inch 24-tooth carbide blades, miter gauge, push stick, blade guard.

Quick, tool-free adjustments

Housing fits snugly around stand base

Lock mechanism fits on top of table stand

Modular guard system protects hands and fingers

Jorgensen Mitre Saw - Mitre Saw

Jorgensen Mitre Saw - Mitre Saw Review

This saw is meant for use with framing and carpentry. It features a durable, one-piece black plastic table and 6 quick-locking automatic settings. The saw has a replaceable blade and doubles as a conventional hand saw.